explicitClick to confirm you are 18+

Aspect To Evaluate When Troubleshooting A Computer

computerrepairblogApr 10, 2018, 8:06:18 PM
repeatthumb_upthumb_down


The functionality of the computer might be affected because of the computer having problems with this when you identify the problems and fix it then you are troubleshooting the computer, the problem could be in software or the hardware, but when troubleshooting the computer then some influences need to be evaluated.

Overheating of the processor could occur even with the modern technology installed in the computer there are those processors which still do overheat, the chips' temperature should not be exceeded when using the computer and when the processor does overheat there is a likelihood that the computer will be slow or in other scenarios the computer might lock up so that the temperature can go back to its normal temperature.

The read access memory of the computer should in good condition to prevent the computer from having some malfunction, therefore you should know which read access memory is suitable for the motherboard you could know the correct one by checking the speed of the motherboard, if the right read access memory is not installed in the motherboard then the computer will be slow and that the computer will be unstable. You can also try file tagging in windows 10.

With the hard disk's condition it should be evaluated since it would be among the reasons why a computer might have a problem with the hard disk there comes a times when they might wear out with this you will notice issues in the computer like having blue screens on the computer which you are unable to explain or at times in the affected drive you might encounter that the access is slow when the hard disk is producing noise it is an indicator that there is problem.

The disk type used un the computers does vary depending on the computer, the disk that you end up to choose will affect the performance and speed of the computer so you should carefully choose the disk and ensure that the interference you choose does not collide with the disk type you choose both of them should be compatible with each other to avoid it from getting any problems like how to prevent shutdown message in windows.

Without your awareness you might find out that there are programs that are still running this could make your computer to lag and also before a program opens up it might take long since there are many others which are still open.

The basic input output system setting are mostly ignored by people but in actual sense it does make the computer to be slow if ignored the settings are left as they are since most people believe they should be always that way but this is not the case when the settings are ignored then the performance is slow.

Read more on this blog post https://www.huffingtonpost.com/jim-t-miller/how-to-help-seniors-with_b_5343015.html.