Split rail fence is a very common method to fence homesteads and it is also among the earliest fencing methods. Those people who reside near the forests should know the importance of knowing the procedure for split rail fence installation. This is for the reason that the enclosure is mostly found in forested areas because it makes most of the materials in wooden area.
Though this method is old, it is still nice and noticeable primarily to those who still stick to the tradition. This method is simple, economical and well-built. The installation is pretty simple and only uses basic tools such as a pair of gloves, helmet, axe, and wedge. Visit here to learn more about Split Rail Fencing. The very important thing about this method is that you can recycle your inoperative timbers and make it into a useful and beautiful enclosure.
The first step you need to do is to ascertain in which area you would install the fence. You need to see first if the area you chose is safe for one to dug. Be sure that there is no water, gas, or power line under the area you are supposed to dig up holes. The lines can be risky to the workforce and to those around the area.
After choosing the perfect area to install your fence, measure the perimeter of the area you want to enclose. Be sure to put a mark on the boundary line to prevent confusion. You can use a ground stakes and make a clear outline by tying a guideline from one corner to following corners. In this way, you can guarantee that you can have a clear guide and a well-stretched line.
After making a guideline, put all the corner posts. Dig up a hole to place the split posts depth. To get the correct size of your hole, it should fit a third of the total length of the post. After that put the concrete to an approximately 24 inches deep, then let it rest for at least 72 hours. Click split rail fence Denver to read more about Split Rail Fencing. Make sure that you placed your posts with about 10 to 12 feet distance from each other. After that, you can now remove the guidelines you made and check if the posts are in straight line.
Then, place a guide wire and make sure the posts are vertically upright. The importance of setting up the wire is to see if the line is accurate based on its dimension and smoothness.
After that, measure the length of all your posts to keep a clean appearance. Using a wedge or axe, cut the post from the top to bottom.
The last step is to join the split post and rail together by using hammer and drive nails. The place will not only keep the place beautiful within, but it will also serve as a strong protection from any destruction. Learn more from https://www.dictionary.com/browse/fencing.