explicitClick to confirm you are 18+

Why Backflow Device Testing Should be Done

isthebackflowtestingservicesAug 24, 2018, 2:47:49 AM

If you are an owner of a commercial and industrial property, then it is your responsibility to install and test backflow devices. And not only them, even homeowners find themselves in situations in which backflow devices must be installed and tested annually.

Most business owners treat backflow device testing as a normal cost of their business and so they have their backflow devices tested and repaired. Many homeowners do not understand the importance of backflow device testing from Houston leak detection and this is the reason why they resist this idea.

It is because of the expense that they resist the testing and they feel that what they pay for their water bill should cover the testing.

They also do not understand the importance of the backflow prevention connection control process in general, and the extreme hazard possible if the program should suffer because of neglect. Pollution and contamination entering the potable water system is a real threat and it has already happened in some communities within the US.

This issue can be resolved if homeowners understand that their water bill does not include a charge or fee for backflow device testing. What the water supplier owns are only the pipes from the source up to the water meter. Beyond the meter, including water pipes, a backflow device belongs to the homeowner. Water suppliers are not required by law to perform the device testing or repairs and they usually don't. They are required to ensure that the testing is accomplished by the owner of the device. Water utilities have found the cost of providing this service too high.

Backflow device testing and repairs can be done by an independent contractor. Only certified contractors can do the backflow device testing. Money and time are needed to be able to get a certification. You should enroll in a training course and pass your written and practical test to receive a certification. This certification must be maintained through scheduled re-testing. Independent contractors must invest in the test equipment and tools so that he is able to conduct tests and perform repairs. Purchasing test equipment is costly and it should be calibrated annually by a certified facility. All of these cost money which water suppliers are not able to absorb.

The federal and state governments have mandated backflow control processes. Backflow device leakages can compromise our potable water system and this is a very real problem.

Most communities have a backflow prevention program which will protect its residents. If the potable water systems come in contact with backflow leakages, then pollutant and contaminants will contaminate the water system. the potable water system will be contaminated with high-level health hazards.

Because backflow devices can wear, weaken, and fail over time since they are mechanical devices, it then becomes important to have backflow device testing from leak detection Houston.