If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.
Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. These incidents affect public health and safety.
GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.
Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.
Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.
Temporary survey markings use pink lines. These are used by surveyors to mark off legal property boundaries.
Electric power lines, cable, conduit, and lighting cable use red lines. This color is appropriate for electrical works since it is associated with fire and danger.
Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.
If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. If you see the color green, then it indicates sewer and drain lines. Hitting this line can truly derail any project for a long period of time.
If you want to learn more about utility lines click here now! View here for more.