explicitClick to confirm you are 18+

How to Install Artificial Grass

topartificialgrassbizwebJun 11, 2018, 2:35:40 AM
repeatthumb_upthumb_down



Everyone wants to go natural in their way and in everything they do or use. Owning that natural grass cover in your compound makes your home complete. However, it might get devastating to maintain healthy green lawn particularly when water is a problem and time is scarce. This now will call for laying artificial grass and mark you, artificial turf is most aesthetic decoration you can have around your home. Laying down the artificial turf is an easy task that you can take on yourself.

Before getting down to work, these are the tools you are going to need. These are the tool; spade, leaf blower, four-inch nails, rake, hammer, gloves, wheelbarrow, turf cutter, mastic gun, compactor and mechanical brush. Check this website http://www.dictionary.com/browse/lawn about lawn.

Do Away with the Old Lawn

Excavate the rugged lawn. Dig in to a depth of not less than three inches. If your lawn is in good condition you can transfer it someone else. If the previous lawn was a natural one, the grass can go to your kitchen garden. Make the ground level. If you are a starter, plan your area that will be covered by the lawn. Do not tamper with any underground wires or water pipes. Also, ensure that the area to be covered does not have drainage problems.

Build a Perimeter Edge

There should be a perimeter that artificial grass will put up against. If there is no one, then you have to create your own edge. There are different kinds of boundaries that can be purchased in the store near you. Or you can still erect one yourself. The edge will protect your lawn and it also creates a beautiful view. Find artificial grass installers near me here.

Level the Ground

You either need granite dust or sand to lay the base for the artificial grass. Here you will need a piece of timber to level the sand across the planned area. The sand bed should have a layer of not less than twenty millimeters.

Lay a Weed Suppressing Fabric

The weed membrane here is used to suppress the weed that may grow. With the laying of artificial grass, you need a weed membrane that will allow water to drain easily. If the membrane goes over the edge, trim it off from the butt area.

Lay down the Artificial Grass Lawn

Place your new artificial grass on the weed membrane. Roll out the lawns towards your window or the door for uniformed view. The lawn will need to be pegged to ground with long nails. Then use a hammer to drive the nails through the lawn firmly into the ground. Trim the excess synthetic grass. Know more about lawn installation near me.

Finishing

Apply sand on the artificial grass. Use around 8kgs of sand on the lawn. The sand trick is to make your artificial grass lawn to appear beautiful and natural, and sand which is heavy holds the lawn to the ground to stop from being blown away.